Wheel Sand Washer

Bucket Wheel Sand Washer

    Sand washer is used in sand making production line for washing the solid and powder out of the sand, in the beneficiation production line for extracting sand, and in other technology processes. It widely applies to the road, hydropower, construction and other industries.

Working Principle

    When operating, the motor drives the bucket wheel slowly rotating through the V-belt and reducer. The sand is put into the washing tank through the feeding groove, and rolls over by the bucket wheel driving. During the rolling, the friction between the sand particles strips the impurities, and breaks the vapor coatings around the particles in order to facilitate dehydration. Meanwhile, put massive water into the washing tank, and form a strong water stream to take the small density impurities away immediately, out of the tank from the overflow port. The clean sand is taken by the bucket wheel, and rises up slowly. The water contained in the sand leaks out and falls into the washing tank through the filter screen on each bucket. This process not only finishes the dehydration of sand, but also saves the water. Finally, the cleaned sand is put into the output groove from the buckets, finishing the whole washing process.

Technical Parameters

Model	Diameter of bucket wheel(mm)	Capacity(t/h)	Power(kw)	Weight(kg)
XS2600(I)	2600	20-50	5.5	2400
XS2600(II)	2600	30-70	5.5	2900
XS2800	2800	50-100	7.5	4000
XS3200	3200	80-120	11	6600
XS3600	3600	120-180	15	8800

Feature

a) High cleanliness, no pollution, low losses of sand.
b) Save water.
c) Few wear parts except the filter screen.
d) Long service life.