Vertical Impact Crusher

Vertical Impact Crusher

    This machine can be widely used in the crushing and shaping of metal and nonmetal ore, construction materials, artificial sand and kinds of metallurgical slag. It is suitable to the fragile materials whose Moh’s hardness is lower than level 9, and not suitable to the viscid materials or materials contained much solid.

Working Principle

    The raw materials are fed into the vertical impact crusher by the feeding machine. The raw materials heap upon the scattering disc, and fall to the dividing disc from the rim of scattering disc. The raw materials are divided into two parts. One part of materials falls into the high-speed rotating centrifugal plate. This part of materials is given high rotating speed and flung out through the runner of centrifugal plate. Firstly, the flying materials collide with the other part of materials which fall down from the rim of dividing disc, and then all the materials impact the lining of crushing cavity. As mentioned above, the materials will be impacted, rubbed and grinded repeatedly until fall out of the crushing cavity and into the discharge bucket.

Technical Parameters

Model	Central feeding （t/h）		Maximum （mm）		Main shaft speed (r/min)	Motor (kw)
	Crushing	Re-Shaping	Crushing	Re-Shaping
VSI7615	60-140	120-280	30	35	1700-1900	55/75×2
VSI8522	100-190	200-380	35	40	1500-1700	90/110×2
VSI9532	150-280	300-540	40	45	1300-1510	132/160×2
VSI1145	220-360	450-640	45	50	1100-1310	400/220×2
VSI1263	454-486	545-583	50	60	900-1200	315×2

Note: All technical parameters above are for reference only; custom specifications can be provided as requested.

Feature and Advantages

a) High efficiency, with the functions of fine crushing and shaping.
b) Simple structure, easy installment and maintenance, and low operation cost.
c) Good particle shape.